大型工业风扇验收标准

大型工业风扇验收标准

总述General

型号规格Model Number ---------------------------------------------------------- OM6B-72

运转方式Operation mode ---------------------------------------------------------可正反方向运转Forward and reverse standard

风扇直径Diameter ------------------------------------------------------------------24 FT / 7.2 Meters

扇叶形状Blade Style -------------------------------------------------------------  Airfoil/OP

扇叶Number of Blades   ------------------------------------------------------- 6

额定功率Nominal Horsepower ------------------------------------------------  2.0 HP / 1.5 kW

装机重量Hanging Weight (average)  --------------------------------------  107 Kg

运输重量Shipping Weight (Including control box, Mounting Hardware) (average)   198 Kg

性能（**转速状况下）Performance (at max speed)

循环风量（正转、向下吹）Displacement (fwd, blowing down)  ---------- 10,670 CMM( m3/min)

循环风量（反转、往上吹）Displacement (rev, blowing up)------------------ 74,69 CMM( m3/min)

**转速Maximum Speed----------------------------------------------------------- 65 RPM

**转速下每小时耗电量Power Usage @ Max. Speed ----------------------- 1.25 kW

**转速下能效Efficiency @ 100% Max. Speed  ------------------------------ 8.53CMM/Watt

**有效区域Maximum Effective Area --------------------------------------------1800 m2

备注：有效近似**覆盖面积根据现场地面具体阻隔情况而变化

典型布置间距Typical Industrial Spacing --------------------------------------------36-40 米 Meters

**噪音Maximum dB-------------------------------------------------------------------58分贝

备注：

*dB Values Were Obtained by Testing. Specific Applications/Installation values may vary.

噪音值为出厂测试值，每个应用工况不同会略有变化

安装固定件Mounting Hardware

标准配置Standard Mount---------------------------------通用工字钢结构梁卡夹装置(250mm)

Universal I-Beam Clamp w/ Swivel Joint and 250mm Drop

混凝土梁卡夹结构（选用）

Glulam Mount (Optional) Brackets w/ Swivel Joint &200MM Drop

延长支架（选配）Additional Drop Extensions (Optional)---------最长2米（从60公分开始以20公分间隔）Up to 2m in 500px Increments

电机Motor

功率HP  -------------------------------------------------------   2 / 1.5 kW

环境温度Ambient Operating Temperature-------------   -20 C°至+40C°

绝缘等级Insulation Class -------------------------------------- F

防护等级Protect Class------------------------------------------IP 55

工作制Work Contition-------------------------------------------S 1

功率因数Service Factor---------------------------------------- 0.8/0.78

齿轮箱Gearbox

型号：Type -------------------------------------------------------- 2-Stage Helical

保养期Service Interval-------------------------------------------ISOVG100合成齿轮油,20,000免维护Lubed For 20,000h

控制箱Motor Control Panel (MCP)

标准电源配置 ---------------------------------------------------单相电源208-240V （16A）或三相电源365-400V （6A）均可。

Standard Power and Max Amp Draw-------------------- --208~240V 1Ø (16A), 365-400V 3Ø (6A), 460-480V

箱体Enclosure---------------------------------------------------IP65防护等级，NEMA 1

电源指示灯-------------------------------------------------------停止/运行状态 (红色 / 绿色)

隔离开关Disconnect Switch Schneider-------------------20-25 Amp, 可锁Lockable

远程转换开关及调速按钮Remote Control Wall Mounted Switch -----------NEMA 4X -正转/停止/反转

Fwd/Off/Rev w/Speed Control Knob

射频滤波器RF Line Filter-------------------------------------装设- Built In

空气断路器Air Breaker--------------------------------------- Schneider 220V1Ø 16A  380V3Ø 10A

急停开关 Emergency Stop----------------------------------ZB2 BS54C

变频器出线电缆VFD Motor Drive Cable -----------------RVV3*2.5+2*1.5-----30 Meters

变频器Frequency Converter--------------------------安川J1000，JB4A005(2.2KW)|380V/220V

安全配置Safety Components

扇叶安全链接，热镀锌钢丝拉索，防护罩Blade Retainer Links (6), Safety Cable, Guy Wires (Ceiling mount only),

质保Warranty

三年整机质保 3 YRS* on Motor, Gearbox & Control Panel.

扇叶、轮毂、安装件终身质保（外力损坏除外）Limited Lifetime on Blades, Hub & Mounting System.